Need the right Alloy Eagle Wheels center caps? This guide highlights popular replacements for Eagle Alloys and American Eagle part numbers, covering key sizes, lug counts, and finishes so you can match your wheels with confidence. Whether you’re replacing a single lost cap or upgrading a full set, we’ve curated options that balance fit, style, and value.
Before you buy, confirm your cap’s bore diameter (e.g., 3.9in, 4.25in, 5.12in), lug count (such as 8-lug dually), and part family (e.g., 3175, 3226, 3307). Measure carefully and check shaft/flange specs where applicable. Use the comparison table below to quickly scan “Best For” uses, then click through to verify exact compatibility with your wheel model.
| Product Image | Product Name | Best For | Check Price |
|---|---|---|---|
 | Eagle 3171-06 Replacement Center Cap | Direct OEM fit | Check Price |
 | Eagle 3117-06 5.12in 8-Lug Cap | 8-lug 5.12in bore | Check Price |
 | GTownWorks 3.9in 4-Pack Eagle 3226 Caps | Budget 4-pack caps | Check Price |
 | Rheedal 5.15in Stainless 8-Lug Dually Caps | Stainless 8-lug dually | Check Price |
 | Eagle Alloys 3226 Chrome 4-Cap Deal | Complete 4-cap set | Check Price |
 | Eagle 3118-06 4.25in Replacement Cap | 4.25in bore fitment | Check Price |
 | American Eagle 3278-06 Chrome Center Cap | Chrome factory look | Check Price |
 | Eagle 3175 Chrome 2-Pack Center Caps | Two-pack value | Check Price |
 | Eagle 3175 Chrome Center Cap | Single cap replacement | Check Price |
 | American Eagle 3307-02 Black Center Cap | Stealth black style | Check Price |
In-Depth Product Reviews
Eagle 3171-06 Replacement Center Cap
The Eagle 3171-06 Replacement Center Cap restores the clean, factory look of your Eagle Alloy wheels while protecting the hub area from dirt and moisture. Built to match the original cap’s profile and logo, it blends seamlessly with existing rims so a single replacement won’t stand out. The chrome-like finish adds a fresh sheen that instantly elevates curb appeal on daily drivers and show trucks alike. Installation is straightforward—designed to use the wheel’s existing retention method (snap/bolt depending on your wheel), it seats firmly for a rattle-free fit. The cap’s molded ABS construction and metal retention components are made to handle road grime and weather, offering dependable durability at a much lower cost than sourcing new wheels. For best results, confirm “3171-06” on your old cap or match measurements/bolt layout to ensure perfect compatibility with your specific Eagle Alloy series.
Pros:
- 👍 Restores true OEM look and logo match on Eagle Alloy wheels
- 👍 Simple, secure install using existing retention hardware
- 👍 Durable ABS with quality plating resists weather and wash cycles
- 👍 Snug fit helps prevent rattles and keeps debris out of the hub
- 👍 Cost-effective fix versus replacing a full set of wheels
Cons:
- 👎 Fits only wheels that specifically use the 3171-06 cap
- 👎 Chrome-style finish can pit over time in salty/winter conditions
- 👎 Sold individually—buy four if you want a matching set
- 👎 Easy to misorder if you don’t verify the part number/measurements
Eagle 3117-06 5.12in 8-Lug Cap
The Eagle 3117-06 5.12in 8-Lug Cap is a purpose-built replacement that refreshes your wheel’s look while protecting the hub. Designed for Eagle Alloy wheels that specify a 5.12-inch center bore and 8-lug setup, it offers a snug push-through fit with dependable retention ribs, so it stays put on rough roads. The clean, high-gloss finish complements polished and chrome-style wheels, helping your rig look complete and well-kept.
Beyond curb appeal, this cap helps keep dirt and moisture away from the hub and bearings, reducing the chance of corrosion over time. Installation is quick—no special tools needed—making it a simple, satisfying upgrade or replacement after a lost or worn cap. If you’re aiming for an OEM-style fit and finish without the guesswork, this model delivers reliable compatibility and durability for daily driving and light off-road use.
Pros:
- 👍 Precise push-through fit for Eagle Alloy wheels with 5.12-inch bore and 8-lug pattern
- 👍 Clean, high-gloss finish that restores a factory-fresh look
- 👍 Helps seal out dirt and moisture to protect hubs and hardware
- 👍 Quick, tool-free installation with secure retention ribs
- 👍 Solid durability for daily driving and occasional off-road
Cons:
- 👎 Compatibility limited to specific Eagle Alloy bore size and lug configuration
- 👎 Finish match may vary versus aged or custom-finished wheels
- 👎 Plastic tabs can crack if forced during install or removal
- 👎 Often pricier than universal, no-name caps
GTownWorks 3.9in 4-Pack Eagle 3226 Caps
These 3.9-inch GTownWorks caps are designed as direct replacements for the Eagle 3226 style center caps, giving tired wheel hubs a clean, finished look without the OEM price. The snap-in design seats securely in the bore, and the smooth, chrome-like face pairs well with most Eagle Alloy finishes. If you’re refreshing a set of older alloy eagle wheels, the uniform shine and tight fit go a long way toward restoring curb appeal.
Sold as a four-pack, they’re a cost-effective way to replace missing or damaged caps across the whole vehicle. Installation is straightforward—align, press, and you’re done—making them a quick driveway upgrade. Just be sure to measure your wheel’s center bore and the old cap’s outer diameter to confirm the 3.9-inch spec matches your setup.
Pros:
- 👍 Direct-fit replacement for Eagle 3226-style applications
- 👍 Clean chrome-like finish refreshes the look of alloy eagle wheels
- 👍 Secure snap-in retention; easy, tool-free install
- 👍 Budget-friendly four-pack covers a full vehicle set
- 👍 Good fitment consistency when bore is measured correctly
Cons:
- 👎 Finish can show wear or pitting over time in harsh climates
- 👎 Not OEM; may lack factory branding or exact color match
- 👎 Fitment sensitive—incorrect bore measurement can lead to loose or tight fit
Rheedal 5.15in Stainless 8-Lug Dually Caps
These stainless 5.15-inch push-through dually caps give 8-lug setups a clean, OE-plus look while protecting the hub from grime and moisture. The polished stainless finish resists rust and pitting better than chrome-plated caps, and the tension-tab design seats securely in the wheel bore without tools.
Pop them in to refresh tired center caps or complete a new dually wheel install. Fitment is straightforward if your wheel’s center bore measures 5.15 inches—a common spec on many aftermarket and OE-style dually rims, including popular Eagle Alloy patterns. They’re a solid, budget-friendly replacement when you want shine and protection without the OEM price tag. As always, measure before ordering to ensure proper retention and clearance.
Pros:
- 👍 Corrosion-resistant stainless steel with a mirror-like finish
- 👍 Quick, tool-free push-through installation with snug retention tabs
- 👍 Protects hubs and hardware from dirt, salt, and road spray
- 👍 Smart, affordable replacement option for many 5.15-inch dually wheels
- 👍 Elevates the look of aging Eagle Alloy-style wheels
Cons:
- 👎 Fitment is bore-specific; won’t work with non-5.15-inch centers
- 👎 Closed-end design may not clear manual locking hubs on some 4x4s
- 👎 Polished stainless shows fingerprints and swirl marks without upkeep
Eagle Alloys 3226 Chrome 4-Cap Deal
The Eagle Alloys 3226 Chrome 4‑Cap Deal restores a cohesive, factory-fresh look to your Eagle Alloy wheels with a matched set of four direct-fit center caps. Engineered to the 3226 spec, each cap seats snugly in the hub opening to conceal axle hardware and complete the wheel’s design. The bright chrome finish delivers a crisp, premium shine that complements polished, machined, or painted rims.
Installation is fast and fuss-free—simply align and snap into place, no special tools required. Buying as a 4-pack ensures uniform finish on all corners and makes it easy to replace missing or weathered caps in one go. Built for reliable retention and everyday driving, these caps are purpose-made for Eagle Alloy applications that call for the 3226 design. For best results, confirm your existing cap number or hub bore before ordering to guarantee a perfect fit.
Pros:
- 👍 Direct-fit replacement for Eagle Alloy wheels that use the 3226 cap
- 👍 Bright chrome finish refreshes the look and matches factory styling
- 👍 Quick snap-in install with secure retention—no tools needed
- 👍 Value-packed 4-cap set ensures consistent shine on all four wheels
Cons:
- 👎 Compatibility is limited to wheels requiring the 3226 cap code
- 👎 Chrome surfaces can show scratches or water spots over time
- 👎 May not clear protruding manual locking hubs on some 4×4 setups
Eagle 3118-06 4.25in Replacement Cap
The Eagle 3118-06 4.25in Replacement Cap is a straightforward, direct-fit solution for refreshing the look of select Eagle Alloy wheels. Sized precisely for a 4.25-inch center bore, it restores that clean, factory-correct appearance while keeping dust and road grime away from the hub area. A corrosion-resistant, chrome-look finish helps your wheels stand out and ties in seamlessly with most Eagle Alloy styles.
Installation is quick and tool-free thanks to its push-through design—just seat it from the back of the wheel with firm, even pressure. Once in place, it holds securely to prevent rattles or wobble at speed. Whether you’re replacing a missing cap or tidying up a full set, this single-piece option offers solid value without compromising fit or finish. Be sure to confirm the 3118-06 part number and 4.25-inch bore to ensure compatibility with your specific wheel model.
Pros:
- 👍 True 4.25-inch fit for select Eagle Alloy wheels
- 👍 Easy push-through, tool-free installation
- 👍 Durable, chrome-look finish elevates appearance
- 👍 Snug retention helps prevent rattles and loss
- 👍 Protects hub area from debris and corrosion
Cons:
- 👎 Compatibility limited to specific Eagle Alloy models; verify part number
- 👎 Finish may show wear over time in harsh winter/salty conditions
- 👎 Exact color/shine may not match older, weathered caps
American Eagle 3278-06 Chrome Center Cap
The American Eagle 3278-06 Chrome Center Cap is a clean, OEM-style refresh for select American Eagle/Eagle Alloy wheels. Its mirror-like chrome finish instantly sharpens your wheel set, hiding exposed hubs and hardware while bringing back that factory shine. If your original cap has faded, cracked, or gone missing, this direct-replacement part restores the look without the cost of new wheels.
Built with a chrome-finished shell and secure snap-in tabs, the 3278-06 installs in minutes—no special tools required. The fit is designed for specific American Eagle/Eagle Alloy wheel styles, so it seats firmly and stays put through daily driving. It’s a solid value play for revitalizing older trucks and SUVs, as long as you match the part number and center bore to your wheel. Routine cleaning with mild soap keeps the chrome bright and corrosion at bay.
Pros:
- 👍 OEM-style fit and finish for select American Eagle/Eagle Alloy wheels
- 👍 Bright chrome look instantly upgrades appearance
- 👍 Quick, tool-free snap-in installation
- 👍 Secure retention tabs help keep the cap in place
- 👍 Cost-effective way to restore a complete, finished wheel face
Cons:
- 👎 Fitment is specific—must verify 3278-06 against your wheel model/center bore
- 👎 Chrome plating can pit or peel if exposed to harsh cleaners or winter salts
- 👎 Retention tabs may crack if forced during removal/installation
Eagle 3175 Chrome 2-Pack Center Caps
Refreshing a set of Eagle Alloy wheels? The Eagle 3175 Chrome 2-Pack Center Caps deliver a clean, factory-style finish. Their bright chrome instantly sharpens your wheel’s appearance while shielding the hub and lug area from road grime, brake dust, and moisture to help keep corrosion at bay.
Designed for select Eagle Alloy fitments, these caps install quickly and seat flush for a rattle-free ride. The secure retention design and precise dimensions promote an OEM-like fit, and the 2-pack format is perfect for replacing a pair on one axle or keeping a spare in the garage.
Because Eagle cap sizing and retention styles vary by wheel model, double-check part numbers, cap diameter, and depth before ordering to ensure compatibility with your specific wheels.
Pros:
- 👍 Bright chrome finish elevates appearance and complements polished/alloy wheels
- 👍 Protective coverage helps keep hub and lug area cleaner and drier
- 👍 Quick, straightforward installation with secure retention
- 👍 Snug, flush fit for a quiet, rattle-free ride
- 👍 Cost-effective 2-pack for partial replacements or spares
Cons:
- 👎 Model-specific fitment; must verify size, depth, and retention style
- 👎 Chrome can show scratches and water spots; requires regular cleaning
- 👎 Two-pack means you may need two sets for a full vehicle
- 👎 May not clear protruding locking hubs or extended dust caps on some applications
Eagle 3175 Chrome Center Cap
The 3175 Chrome Center Cap is a clean, factory-style replacement that instantly refreshes the look of compatible Eagle Alloy wheels. Its bright chrome finish and embossed Eagle branding deliver a crisp, OEM appearance, hiding lug hardware and worn hubs for a sharper, more finished face. The plating and clear coat help resist corrosion and pitting, so the shine holds up through seasons of daily driving.
Installation is straightforward—pop off the old cap and snap this one into place using the factory-style retention system. The low-profile design offers good brake clearance while seating securely, reducing the chance of cap loss over rough roads. As with most Eagle Alloy caps, correct fitment depends on matching the part number and backside clip style, so verifying your wheel model before ordering ensures a perfect, rattle-free fit.
Pros:
- 👍 Bright, OEM-style chrome finish elevates wheel appearance
- 👍 Simple, tool-free installation with secure retention
- 👍 Corrosion- and fade-resistant plating for long-lasting shine
- 👍 Cost-effective way to replace missing or worn caps
Cons:
- 👎 Not universal—must match specific Eagle Alloy wheel models/part numbers
- 👎 Chrome finish shows fingerprints and needs periodic polishing
- 👎 Plastic construction can crack if forced during installation
American Eagle 3307-02 Black Center Cap
The American Eagle 3307-02 Black Center Cap is a straightforward, budget-friendly way to refresh the look of your Alloy/Eagle wheels. Built with impact-resistant ABS and a sleek black finish, it hides exposed hubs and lug hardware for a clean, uniform appearance. The coating is designed to resist road grime and UV fade, so the cap stays sharp-looking through daily driving and regular washes.
As a direct replacement for wheels that use the 3307-style cap, it provides an OEM-like fit when matched by part number. Installation is typically quick and uses the wheel’s original retention method; many applications are a press-fit, while some may secure from the back of the wheel. Beyond aesthetics, the cap helps keep dust and moisture away from the hub area. To ensure a perfect match, confirm “3307” on your old cap and verify outer diameter and depth before ordering.
Pros:
- 👍 Clean, stealthy black finish modernizes older Eagle wheels
- 👍 Direct-fit replacement when matched to the 3307 cap style
- 👍 Durable ABS with UV-resistant coating resists chips and fading
- 👍 Quick install and low-cost way to refresh a full wheel set
Cons:
- 👎 Fitment is specific to 3307-style applications; measurements must be verified
- 👎 Plastic construction can crack if over-tightened or mishandled during service
- 👎 Black finish may not match chrome or polished wheel setups
Buyer’s Guide
Measure First: Bore, Lip Style, and Cap Height
Match the cap to your wheel’s exact hub bore and retention style. Eagle Alloy wheels used both snap-in (with retention tabs) and push-through (from the back) designs, typically sized by bore diameter (inches/mm) and overall height. If you have 4×4 manual-locking hubs or protruding axle nuts, confirm the cap’s internal height so it clears without rubbing.
Material and Finish Choices
Common options include chrome-plated ABS, black ABS, polished aluminum, or billet aluminum. ABS is lightweight and affordable, but billet or metal caps resist cracking and heat better. For 2025 daily use, look for UV-stable coatings and corrosion-resistant fasteners to avoid peeling and pitting.
OEM, Repro, and Custom in 2025
Original Eagle Alloy caps can be discontinued or scarce, so high-quality reproductions and custom-made (CNC or 3D-printed) alternatives matter. Verify part numbers stamped inside the cap (e.g., wheel series) and compare lip profiles and clip layouts. Favor sellers who provide exact measurements, return policies, and clear photos of the back side of the cap.
Helpful FAQ Section
Q1: How do I confirm which center cap fits my Eagle Alloy wheels?
A1: Measure the wheel’s hub bore with calipers, note the retention type (snap-in tabs vs push-through), and check the needed internal height. If possible, read the wheel model or series stamped on the back (e.g., 028, 058) and match it to a cap known to fit that series.
Q2: Are center caps interchangeable across different Eagle Alloy models?
A2: Not reliably. Even similar-looking caps can vary in diameter, lip depth, and clip design. Always match bore size and retention style, and when available, the exact wheel series or part number.
Q3: Will push-through caps require me to remove the wheel?
A3: Usually yes. Push-through caps install from the back side of the wheel, so the wheel must come off. Snap-in caps often install from the front without removing the wheel, provided you have room to work.
Q4: What if my 4×4 hub or axle nut protrudes?
A4: Choose a “tall” or deep cap with sufficient internal clearance. Check the cap’s internal depth measurement and compare it to how far your hub protrudes beyond the wheel face to avoid contact or rattling.
Q5: How can I keep snap-in caps from popping out?
A5: Ensure the bore and cap lip are clean, undamaged, and free of old adhesive. Replace tired metal clips or retention rings if applicable. Lightly bending metal retention tabs (if designed for it) can improve grip; avoid over-flexing plastic tabs.
Q6: Can I use custom or 3D-printed caps in 2025?
A6: Yes, many owners use billet or 3D-printed solutions when OEM caps are discontinued. Provide exact measurements, choose heat- and UV-resistant materials, and test fit carefully before road use.
Final Verdict
Finding the right alloy eagle wheels center caps in 2025 is all about precise measurements and choosing durable materials that match your wheel’s retention style and clearance needs. Whether you source rare OEM, quality reproductions, or custom pieces, verify bore size, clip design, and cap height, and prioritize UV- and corrosion-resistant finishes for long-term looks and fitment you can trust.
